Installation
2ZR-FXE COOLING: TEMPERATURE SWITCH: INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Using a union nut wrench (19 mm), install the engine coolant temperature sensor.
Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)
NOTICE:
Do not apply any excessive force to the heater pipe when installing the engine coolant temperature sensor.
(b) Connect the engine coolant temperature sensor connector.
2. ADD ENGINE COOLANT (for Engine) Coolant (for Engine)
3. INSPECT FOR COOLANT LEAK (for Engine) Cooling System
4. INSTALL NO. 1 ENGINE UNDER COVER