Removal

THEFT DETERRENT / KEYLESS ENTRY: CERTIFICATION ECU: REMOVAL

1. PRECAUTION

NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work Service Precautions.

2. REMOVE REAR NO. 3 FLOOR BOARD Removal

3. REMOVE DECK FLOOR BOX RH Removal

4. REMOVE REAR NO. 3 FLOOR BOARD UPPER PLATE Removal

5. DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

7. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

8. REMOVE ECU INTEGRATION BOX RH Removal

9. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Disengage the 2 craws and remove the certification ECU (smart key ECU assembly).