Installation

2ZR-FXE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket to the engine coolant temperature sensor.

(b) Using a union nut wrench 19 mm, install the engine coolant temperature sensor.

Torque : 20 Nm (200 kgf-cm, 14 ft-lbf)

NOTICE:
Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a union nut wrench Service Precautions.

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL INVERTER RESERVE TANK ASSEMBLY Installation

3. INSTALL FUEL INJECTOR ASSEMBLY

Installation.

4. ADD COOLANT (for Engine) Coolant (for Engine)

5. INSPECT FOR COOLANT LEAK (for Engine) Cooling System

6. INSPECT FOR FUEL LEAK Fuel System