Installation

PRE-COLLISION: SEAT BELT CONTROL ECU: INSTALLATION

1. INSTALL SEAT BELT CONTROL ECU

(a) Engage the 2 claws to install the seat belt control ECU.





2. INSTALL ECU INTEGRATION BOX RH

(a) Connect each connector.

(b) Install the ECU integration box RH with the bolt and 2 nuts.





3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. INSTALL REAR NO. 3 FLOOR BOARD UPPER PLATE Installation

6. INSTALL DECK FLOOR BOX RH Installation

7. INSTALL REAR NO. 3 FLOOR BOARD Installation

8. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.