Removal

PRE-COLLISION: SEAT BELT CONTROL ECU: REMOVAL

1. REMOVE REAR NO. 3 FLOOR BOARD Removal

2. REMOVE DECK FLOOR BOX RH Removal

3. REMOVE REAR NO. 3 FLOOR BOARD UPPER PLATE Removal

4. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal

6. REMOVE ECU INTEGRATION BOX RH

(a) Remove the bolt and 2 nuts.





(b) Disconnect each connector and remove the ECU integration box RH.

7. REMOVE SEAT BELT CONTROL ECU

(a) Disengage the 2 claws and remove the seat belt control ECU.