C1695

PARK ASSIST / MONITORING: ADVANCED PARKING GUIDANCE SYSTEM: C1695: Zero point Calibration of Vehicle Height Sensor Incomplete
C1695 - Zero point Calibration of Vehicle Height Sensor Incomplete

DESCRIPTION

This DTC is stored when the parking assist ECU judges that the zero point calibration of the vehicle height sensor is incomplete (height control sensor vehicle height difference setting is incomplete).





INSPECTION PROCEDURE

NOTICE:
* When the "System initializing" message is displayed on the navigation computer sub-assembly after the auxiliary battery cable has been disconnected, correct the steering angle neutral point Initialization.
* Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the advanced parking guidance system may be needed Calibration.

PROCEDURE

1. ADJUST SETTINGS (HEIGHT CONTROL SENSOR VEHICLE HEIGHT DIFFERENCE SETTING)

(a) Perform the following procedure depending on the memory conditions to register the vehicle information into the parking assist ECU.

(1) Height control sensor vehicle height difference setting Calibration

NEXT -- Continue to next step.

2. CHECK DTC OUTPUT

(a) Clear the DTCs Advanced Parking Guidance System.

(b) Check for DTCs Advanced Parking Guidance System.

Result:





HINT
* If DTC C1695 is output, perform height control sensor vehicle height difference setting again.
* If DTC C1695 is still output after performing height control sensor vehicle height difference setting 3 times, replace the parking assist ECU.

B -- END

A -- REPLACE PARKING ASSIST ECU Removal