Installation

LIGHTING (EXT): HEIGHT CONTROL SENSOR: INSTALLATION

1. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

(a) Engage the guide and install the rear height control sensor sub-assembly with the 3 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

2. INSTALL REAR WHEEL Installation

3. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSTALL DECK FLOOR BOX RH Installation

5. INSTALL REAR DECK FLOOR BOX Installation

6. INSTALL NO. 1 DECK BOARD Installation

7. INSTALL NO. 2 DECK BOARD Installation

8. INSTALL DECK BOARD ASSEMBLY Installation

9. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL

Initialization

10. ADJUST HEADLIGHT AIMING

Adjustments