Removal

LIGHTING (EXT): FRONT TURN SIGNAL LIGHT ASSEMBLY: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure described below is for the LH side.

1. REMOVE FRONT BUMPER ASSEMBLY

Removal

2. REMOVE FRONT TURN SIGNAL LIGHT ASSEMBLY

(a) Disconnect the connector.





(b) Disengage each clamp.

Text in Illustration





(c) Remove the 2 screws.

(d) Disengage the guide and remove the front turn signal light assembly.

3. REMOVE FRONT TURN SIGNAL LIGHT BULB

(a) Turn the front turn signal light plug assembly with the front turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.





(b) Remove the front turn signal light bulb from the front turn signal light plug assembly.