Installation

POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: INSTALLATION

1. INSTALL POWER MANAGEMENT CONTROL ECU

(a) Engage the 2 claws to install the power management control ECU as shown in the illustration.





2. INSTALL ECU INTEGRATION BOX RH

(a) Install the ECU integration box RH with the bolt and 2 nuts.

Bolt - Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

Nut - Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Engage the 3 clamps.

(c) Connect each connector.

3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation

4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

6. INSTALL DECK FLOOR BOX RH Installation

7. INSTALL REAR DECK FLOOR BOX Installation

8. INSTALL NO. 1 DECK BOARD Installation

9. INSTALL NO. 2 DECK BOARD Installation

10. INSTALL DECK BOARD ASSEMBLY Installation