Installation

WIPER / WASHER: HEADLIGHT CLEANER CONTROL RELAY: INSTALLATION

1. INSTALL HEADLIGHT CLEANER CONTROL RELAY

(a) Engage the claw to install the headlight cleaner control relay as shown in the illustration.





(b) Install the washer jar assembly with the bolt.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(c) Engage the clamp.

(d) Connect the 2 connectors.

(e) Connect the 2 washer hoses.

(f) Engage the 2 washer hoses to the hose clamp.

(g) Install the 2 bolts.





Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(h) Engage the clamp.

(i) Connect the 2 connectors.

(j) Connect the washer jar cap to the washer jar assembly.

NOTICE:
Confirm that it is correctly inserted into the washer jar assembly.

(k) Engage the clip.

2. INSTALL INLET AIR CLEANER ASSEMBLY Installation

3. INSTALL FRONT BUMPER ASSEMBLY

Installation