Removal

U140F AUTOMATIC TRANSAXLE: SPEED SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE BATTERY

(a) Loosen the nut and remove the bolt and battery clamp.

(b) Remove the battery.

(c) Remove the battery tray.

(d) Remove the 4 bolts and battery carrier.

(e) Remove the 2 bolts and battery bracket reinforcement.

3. REMOVE SPEED SENSOR NT





(a) Disconnect the sensor connector.

(b) Remove the bolt and sensor.

(c) Remove the O-ring from the sensor.

4. REMOVE SPEED SENSOR NC





(a) Disconnect the sensor connector.

(b) Remove the bolt and sensor.

(c) Remove the O-ring from the sensor.