CD cannot be Inserted / Played or CD is Ejected Right After Insertion

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM (w/ USB Audio System): CD cannot be Inserted / Played or CD is Ejected Right After Insertion
- CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF A PROPER CD IS INSERTED

(a) Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

OK:

CD is normal.

HINT
* Translucent or uniquely-shaped CDs cannot be played.
* CDs with adhesive paper labels should not be played.
* Commercial audio CDs can be played.
* CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
* MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.
* For details on playable CDs.

NG -- CD IS FAULTY
OK -- Continue to next step.

2. CHECK THAT CD IS INSERTED PROPERLY

(a) Check whether or not the CD is inserted upside down.

OK:

CD is properly inserted.

NG -- SET CD PROPERLY
OK -- Continue to next step.

3. CLEAN CD AND RECHECK

(a) Disc cleaning.

(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to outside in a radial direction.





OK:

Malfunction disappears.

NOTICE:
Do not use a conventional record cleaner or antistatic preservative.

NG -- REPLACE CD AND RECHECK

OK -- CD IS FAULTY

4. REPLACE CD AND RECHECK

(a) Replace the CD with a known good one and check that the malfunction disappears.

OK:

Malfunction disappears.

NG -- REPLACE RADIO RECEIVER ASSEMBLY Removal

OK -- CD IS FAULTY