Removal

OTHER SYSTEM: REAR POWER OUTLET SOCKET: REMOVAL

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE REAR DOOR SCUFF PLATE LH Removal

4. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

5. REMOVE PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY

6. REMOVE TONNEAU COVER ASSEMBLY

7. REMOVE REAR FLOOR NO. 1 BOARD

8. REMOVE DECK BOARD ASSEMBLY

9. REMOVE REAR FLOOR NO. 3 BOARD

10. REMOVE REAR FLOOR NO. 2 BOARD

11. REMOVE REAR FLOOR NO. 1 MAT SUPPORT SIDE PLATE Removal

12. REMOVE BACK DOOR WEATHERSTRIP

13. REMOVE REAR FLOOR FINISH PLATE Removal

14. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH

15. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY

16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/ Rear No. 2 Seat) Removal

17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (w/o Rear No. 2 Seat) Removal

18. REMOVE REAR POWER OUTLET SOCKET ASSEMBLY





(a) Detach the 2 claws fittings and remove the socket.