Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Sienna AWD V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Engine Temperature Sensor >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





2GR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket onto the engine coolant temperature sensor.





Text in Illustration





(b) Using a 19 mm deep socket wrench, install the engine coolant temperature sensor.

Torque : 20 Nm (200 kgf-cm, 14 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. ADD ENGINE COOLANT Service and Repair

3. INSPECT FOR COOLANT LEAK Testing and Inspection

4. INSTALL AIR CLEANER AND HOSE Installation

5. INSTALL AIR CLEANER INLET COVER ASSEMBLY SEAL Installation

6. INSTALL FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY Installation

7. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Installation

8. INSTALL NO. 1 ENGINE UNDER COVER Installation

9. INSTALL V-BANK COVER SUB-ASSEMBLY Installation
pro multis · About Operation CHARM