Removal

2GR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

2. REMOVE NO. 1 ENGINE UNDER COVER Removal

3. DRAIN ENGINE COOLANT Service and Repair

4. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Removal

5. REMOVE FRONT OUTER COWL TOP PANEL SUB-ASSEMBLY Removal

6. REMOVE AIR CLEANER INLET COVER ASSEMBLY SEAL Removal

7. REMOVE AIR CLEANER AND HOSE Removal

8. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

(a) Disconnect the engine coolant temperature sensor connector.

(b) Using a 19 mm deep socket wrench, remove the engine coolant temperature sensor.

Text in Illustration