Installation

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING ECU: INSTALLATION

1. INSTALL TIRE PRESSURE WARNING ECU

(a) Engage the tab into the hole as shown in the illustration and install the tire pressure warning ECU.





(b) Install the nut.

Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

(c) Connect the connector to the tire pressure warning ECU.

2. INSTALL NO. 1 INSTRUMENT PANEL LOWER FINISH PANEL Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. REGISTER TRANSMITTER ID

Registration

5. INSPECT TIRE PRESSURE WARNING SYSTEM

Test Mode Procedure