Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Tacoma 4WD L4-2.7L (2TR-FE) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Neutral Safety Switch >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





A340F AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: INSTALLATION

1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY

(a) Install the park/neutral position switch onto the manual valve lever shaft and provisionally tighten the adjusting bolt.

(b) Install the grommet, a lock washer and the nut.

Torque : 6.9 Nm (70 kgf-cm, 61 in-lbf)

(c) Turn the control shaft lever clockwise until it stops, and then turn it counterclockwise 2 notches to set it to the N position.





Text in Illustration





(d) Align the neutral basic line with the switch groove and tighten the adjusting bolt.





Text in Illustration





Torque : 13 Nm (130 kgf-cm, 9 ft-lbf)

(e) Bend the tabs of the lock washer.

HINT
Bend at least 2 of the lock washer tabs.

2. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

3. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY Adjustments

4. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY Adjustments

5. ADJUST SHIFT LEVER POSITION Adjustments

6. INSPECT SHIFT LEVER POSITION Adjustments
pro multis · About Operation CHARM