Installation

BRAKE CONTROL: STEERING ANGLE SENSOR: INSTALLATION

1. INSTALL STEERING SENSOR





(a) Install the steering sensor onto the spiral cable.

NOTICE:
* Engage the claws securely.
* Be careful not to damage the claws.

2. REMOVE PLACE FRONT WHEELS FACING STRAIGHT AHEAD

3. INSTALL SPIRAL CABLE Installation

4. CENTER SPIRAL CABLE Installation

5. INSTALL STEERING COLUMN COVER UPPER Installation

6. INSTALL STEERING COLUMN COVER LOWER Installation

7. INSTALL STEERING WHEEL ASSEMBLY Installation

8. INSTALL STEERING PAD ASSEMBLY Installation

9. INSTALL STEERING WHEEL COVER LOWER NO. 3 Installation

10. INSTALL STEERING WHEEL COVER LOWER NO. 2 Installation

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

12. INSPECT STEERING PAD ASSEMBLY

13. INSPECT SRS WARNING LIGHT

Diagnosis System