Removal

2TR-FE EMISSION CONTROL: AIR PUMP: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE AIR PUMP ASSEMBLY





(a) Remove the 2 bolts, then separate the washer jar.

HINT
Perform the above procedure to make space for removing the air pump assembly.

(b) Disconnect the air injection system No. 1 hose.





(c) Disconnect the air pump connector and wire harness clamp.

(d) Remove the 3 bolts, then remove the air pump with bracket.





(e) Disconnect the air pump connector clamp.





(f) Disengage the 3 fittings of the air pump insulator, and remove the air pump from the bracket.