Removal (from 08/2011)

CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: REMOVAL

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal

4. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal

5. REMOVE STEERING PAD (w/o Steering Pad Switch) Removal

6. REMOVE STEERING PAD (w/ Steering Pad Switch) Removal

7. REMOVE CRUISE CONTROL MAIN SWITCH

(a) Disconnect the connector.





(b) Remove the 2 screws.

(c) Remove the switch, as shown in the illustration.