Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Venza AWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Wiper and Washer Systems >> Wiper Switch >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Wiper Switch: Testing and Inspection





WIPER / WASHER: WIPER SWITCH: INSPECTION

1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:

Front Wiper Switch
Front Washer Switch
Rear Wiper Switch
Rear Washer Switch


















If the result is not as specified, replace the windshield wiper switch assembly.

Text in Illustration





(b) Check the intermittent operation.

(1) Connect a voltmeter positive (+) lead to terminal D40-3 (+1) and a negative (-) lead to terminal D39-2 (EW).

(2) Connect a battery positive (+) lead to terminal D40-2 (+B) and a negative (-) lead to terminal D39-2 (EW) and D40-1 (+S).

(3) Turn the wiper switch to the INT position.

(4) Connect a battery positive (+) lead to terminal D40-1 (+S) for 5 seconds.

(5) Connect a battery negative (-) lead to terminal D40-1 (+S). Operate the intermittent wiper relay and check the voltage between terminals D40-3 (+1) and D39-2 (EW).

OK:

Voltage changes as shown in the illustration.





If the result is not as specified, replace the windshield wiper switch assembly.

Text in Illustration





pro multis · About Operation CHARM