Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Yaris Hatchback L4-1.5L (1NZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Air Flow Meter/Sensor >> Service and Repair >> Installation (from 07/2011)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation (from 07/2011)





1NZ-FE ENGINE CONTROL: MASS AIR FLOW METER (for Hatchback): INSTALLATION

1. INSTALL MASS AIR FLOW METER

(a) Install a new O-ring to the mass air flow meter.

NOTICE:
Do not twist the O-ring.

(b) Install the mass air flow meter with the 2 screws.

Torque : 1.0 Nm (10 kgf-cm, 9 in-lbf)

NOTICE:
* If a component has been dropped or subjected to a strong impact, replace it.
* Make sure that the O-ring is not damaged or does not jump out of position during installation.

HINT
Perform "Inspection After Repairs" after replacing the mass air flow meter Programming and Relearning.

(c) Connect the mass air flow meter connector.

(d) Engage the wire harness clamp.
pro multis · About Operation CHARM