Removal (from 07/2011)
1NZ-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR (for Hatchback): REMOVAL
1. REMOVE NO. 2 CYLINDER HEAD COVER Removal (from 07/2011)
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH NO. 1 AIR CLEANER HOSE Removal (From 07/2011)
3. REMOVE BATTERY
(a) Disconnect the battery terminal.
(b) Remove the 2 nuts and the battery clamp.
(c) Remove the battery.
4. REMOVE CAMSHAFT POSITION SENSOR
(a) Disconnect the camshaft position sensor connector.
(b) Remove the bolt and camshaft position sensor.
