Maintenance Indicator Reset

Reset the Maintenance Data (U.S.A. only)
After the required maintenance is performed according to the maintenance schedule, please reset the maintenance data.
To reset the data, follow the procedure described below:

Vehicles without a smart key system
[1] Switch the display to the trip meter A and then turn the engine switch to the ""LOCK" position.

[2] While pressing the "DISP" button, turn the engine switch to the "ON" position (do not start the engine because reset mode will be canceled).

[3] Continue to press and hold the button until the trip meter displays "000000".

Vehicles with a smart key system
[1] Switch the display to the trip meter A and then turn the engine switch off.

[2] While pressing the "DISP" button, turn the engine switch to IGNITION ON mode (do not start the engine because reset mode will be canceled).

[3] Continue to press and hold the button until the trip meter displays "000000".