Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 1987 >> Golf L4-1781cc 1.8L SOHC >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Accelerator Linkage
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Linkage

Accelerator linkage/cable, adjusting

Note
Accelerator linkage must be adjusted so that the operating lever on transmission is against stop (no throttle position) when throttle valve is closed (idle position).

Work sequence

- engine warm

- gear selector in P position




- loosen adjusting nuts and remove accelerator cable (arrows)




- remove nuts 1 and 2 on support bracket. Push throttle cable sleeve in direction of arrow until there is no play. Throttle valve must remain closed and accelerator/transmission linkage in closed position

- turn nut 1 against support bracket and tighten nut 2 to 10 Nm (89 in lb)

- install accelerator cable

Note
The assistance of a second mechanic is required to perform remaining operations

- depress accelerator pedal completely to stop (kick-down)




- push transmission operating lever against kickdown stop (arrow) and turn adjusting nut A until slack is out of cable

- release accelerator pedal and then depress completely to stop (kick-down) again

- check that transmission operating lever rests against kick-down stop (arrow) and tighten locknut
pro multis · About Operation CHARM