Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Full Throttle Enrichment

Diaphragm Pressure Regulator Testing Connections:





1. Connect an ammeter between the differential pressure regulator harness connector and the differential pressure regulator, using VOLKSWAGEN special tool #VW 1315A/1 or equivalent.

CAUTION: The small female terminals in the differential pressure regulator harness connector are easily damaged. If fabricating a test harness, use the appropriate male terminals to make connections with the harness connector.

Coolant Temperature Sensor:





2. Remove the harness connector from the coolant temperature sensor and bridge the two terminals of the connector with a jumper wire.
3. Start the engine and raise to above 2500 RPM.

Full Throttle Enrichment Test:





4. Actuate the full throttle switch.
5. Measure the differential pressure regulator current.

^ Differential Pressure Regulator current should increase to approx. 16 mA.

If the correct measurement is not obtained check the CIS-E harness. Refer to SYSTEM ELECTRICAL TESTS. If the harness is OK the CIS-E control unit may be defective.