Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 1990 >> Vanagon Syncro AWD F4-2109cc 2.1L (MV) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> Electrical Testing - Ignition and Injection System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electrical Testing - Ignition and Injection System



Electrical Testing - Ignition And Injection System

Requirements

Battery OK
Fuel pump and fuel pump relay OK
Idle stabilizer control unit OK

Note: Internal resistance of the test equipment and ambient temperature have a strong influence on test results, digital multimeter US1119 should be used to perform testing.

The specified values given are for ambient temperatures of 0° to +40°C (32° - 104°F)

If the measured value deviates from the specified values, determine fault according to current flow diagram. Check wiring and connectors before replacing any parts.

CAUTION: To avoid damage to circuitry, switch to the proper measuring range before connecting the test leads of digital multimeter


ECU Connector Pin Designation:






Test Chart 1, Steps 1 To 4:






Test Chart 2, Steps 5 To 11:





pro multis · About Operation CHARM