Height Adjustable Column

Height adjustable column

Note: The height-adjustable steering column cannot be disassembled. The steering column is to be replaced complete if there is damage to the column tube, column or universal joint.






Fig. 1 Adaptor sleeve, installing
place sleeve on column and tighten until firmly seated using a nut and washer






Fig. 2 Adaptor sleeve, removing
use only puller with a clamp, e.g. Kukko 204-2

Lock cylinder, removing/installing

Removing






remove steering column
remove steering column switch
insert ignition key in Ignition lock
mark dimension a = 12 mm (on line with key)
bore hole (approximately 3 mm diameter) through steenng lock housing until stop spring of lock cylinder is visible (hole depth = approximately 3 mm)
compress stop spnng with a punch and pull out lock cylinder with key

Installing

press lock cylinder into steering lock housing

Note: The lock cylinder can be pressed in to stop by gently turning the key in the lock cylinder.