Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Testing and Inspection

CHECKING IGNITION COIL

- Disconnect harness connector and ignition wire from Ignition Coil (N152).

- Check primary resistance between terminals -1- and -15- using Fluke 83 multimeter.

^ Specified value: 0.5 - 0.7 Ohms.

- Check secondary resistance between terminals -4- and -15-.

^ Specified value: 3000 to 4000 Ohms.

- If NOT OK:

- Remove Ignition Coil and disconnect Ignition Coil Power Output Stage (N157).
- Repeat test.