Fuse/Relay Panel, Removing and Installing

CAUTION: Service Precautions

NOTE:
- The relay plate with fuse box is located under the instrument panel on the left-hand side.

Removal and Installation:

- Remove the instrument panel trim.
- Press securing clips -1- on left and right-hand side of relay plate in direction of arrow, until the retaining pins -2- on the clips can be pulled out of the recesses on the retainer -4-.
- Swing securing clips -1- forward and pull off relay plate pins -3-.
- Press left-hand retainer -4- outward until pin -5- is no longer engaged in the retainer and then unhook relay plate.

NOTE: When installing, pin -5- and retaining pins -2- must engage in retainer recesses.