Camshaft, Engine

DIMENSIONS
New Camshafts:
Journal Diameter 26.00 mm (1.0236)
Camshaft Axial Clearance:
Maximum 0.15 mm (0.0059 inch)
Camshaft Radial Clearance:
Wear limit 0.11 mm (0.0043 inch)
Camshaft Run Out:
Maximum 0.01 mm (0.0004 inch)
Valve Timing:
Intake:
Opens after Top Dead Center (TDC) 6.5°
Closes after Bottom Dead Center (BDC) 44.5°
Exhaust:
Opens before BDC 41.7°
Closes after TDC 3.5°

Reconditioned Camshafts:
Journal Diameter 25.75 mm (1.0138)
Camshaft Axial Clearance:
Maximum 0.15 mm (0.0059 inch)
Camshaft Radial Clearance:
Wear limit 0.11 mm (0.0043 inch)
Camshaft Run Out:
Maximum 0.01 mm (0.0004 inch)
Valve Timing:
Intake:
Opens after TDC 6.5°
Closes after BDC 44.5°
Exhaust:
Opens before BDC 41.7°
Closes after TDC 3.5°

NOTE: Undersize camshaft is not supplied as replacement part. For replacement, install standard dimension camshaft with appropriate bearing shells.

TIGHTENING SPECIFICATIONS
Bearing Cap Nut 20 Nm (15 ft. lbs.)
Cam Sprocket Bolt 80 Nm (60 ft. lbs.)