Freeze Frame Data, Mode 2

FREEZE FRAME DATA, MODE 2

NOTE: If a malfunction that illuminates the MIL is detected by the Engine Control Module (ECM) and is then stored, simultaneously, the operating conditions existing at the time the malfunction was stored will also be stored, and can be interrogated via mode 2.
Breakdown of the (PID) identification parameters see diagnostic data. Current Data, Mode 1

- Press -2- button to select "Freeze Frame Data" mode 2.

Indicated on display

Mode 42 0 PID 0 Module 10 ->*
Freeze Frame Data

- Press -> button.

Module 10* or 1A* will be activated (alternately):

- Module 10 = Engine Control Module (ECM) -J220-
- Module 1A = Transmission Control Module (TCM) -J217-

- Press -> button, and the operating conditions will be printed out as a block, assuming there is a malfunction stored in DTC memory that has illuminated the MIL.
- Press the -C- button to exit mode 2.