Paint Damage, Repairing

Paint Damage, Repairing

For paint repair and corrosion protection.
For paint damage in non-visible areas, following method is suitable:
- Paint twice (wet on wet) with glass/paint primer D 009 200 01 or equivalent - drying time approx. 10 minutes

Surplus bonding and sealing compound, removing

CAUTION:
- When using any cleaning agent, follow all cautions and warnings listed on the containers.
- While adhesive is curing, do not put pressure on glass from inside.
- Part numbers are for reference only. Always check with your Parts Department for latest information.

Adhesive remover D 002 000 10 or equivalent is recommended for use as a cleaning agent. When using adhesive remover, all safety instructions must be observed.

- First clean painted areas roughly with a dry cloth. Remove remaining sealant with cleaning agent D 002 000 10 or equivalent.

Plastic trim, cleaning
- Allow bonding/sealing material to cure (approx. 1 hour) and then pull off molding (repair profile), installing (side and rear windows).