Coding Control Module/Radio (Function 07)

Use this function to code the radio with the various equipment variations available.

Coding:
- Connect VAG 1551 Scan Tool (ST), input address word 56 "Radio" and then press -> button, until "Select function XX" is shown in display. Connecting VAG 1551 Scan Tool

Indicated on display (select function):

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -7- to select function 07 "Code control module".
- Press -Q- button to confirm input.

- Indicated on display:

Coding control module
Enter code number XXXXX (0-32000)

Coding Possibilities:
- Check/enter applicable code number from code table according to model and equipment particulars.

XX Model
00 Golf/Jetta
07 Cabrio

XXX System designation
400 without CD changer, with regular antenna
401 without CD changer, with amplified antenna
402 with CD changer and regular antenna
403 with CD changer and amplified antenna

Coding example: 00400 = Golf/Jetta without CD changer, with regular antenna (no GTI/GLX).

Indicated on display:

Coding control module Q
Enter code number 00400 (0-32000)

- Press -Q- button to confirm input.

Indicated on display (select function):

Rapid data transfer HELP
Select function XX

- End output (function 06).