Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 1999 >> Eurovan V6-2792cc 2.8L (AES) >> Repair and Diagnosis >> Power and Ground Distribution >> Relay Box >> Service and Repair >> Multi-Pin Plug Behind Relay Plate, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Multi-Pin Plug Behind Relay Plate, Removing and Installing




Multi-pin plug, removing







- Pull the retaining slide -1-, on rear of relay plate, out of housing -arrow- as far as possible (about 5 mm, (.2 in.)).







- Press retaining lug on multi-pin connector -arrow- and pull out of relay plate.


Multi-pin connector, installing







NOTE: Insert connector so that locking pin -2- faces toward locking slide -1-.


- Push multi-pin connector into appropriate location to stop with locking pin -2- located in recess -4- until retaining tab -3- engages.
- Push locking slide -1- against stop -arrow-; only possible when all multi-pin connectors are pushed in to retaining tab -3- engagement.
pro multis · About Operation CHARM