Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 1999 >> Jetta Sedan (9M2) V6-2.8L (AFP) >> Repair and Diagnosis >> Powertrain Management >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Technical Service Bulletins >> All Technical Service Bulletins >> Engine Controls - ECM Harness Connector Modification
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Controls - ECM Harness Connector Modification

Condition

Electronic Control Module (ECM), Modifying ECM Connector To Match Wiring Harness





24 07 04 Jan. 25, 2007, 2002043 supersedes Technical Bulletin Group 24 number 00-02 dated Oct. 24, 2000 due to inclusion in ElsaWeb.

Technical Background
After engine harness or ECM replacement, the ECM may not mate with the ECM harness connector.

Production Solution
N/A

Service





If ECM does not mate with the ECM harness connector:
- Remove tabs on the ECM (arrows A and B) using a soldering pencil (view shows ECM connector without pins).

NOTE: Always wear protective eye wear!
Provide adequate ventilation!
Take care not to damage electrical pins on the ECM!

- Arrow A = 3 tabs to be removed
- Arrow B = 1 tab (longest) to be removed

After this material has been removed from the ECM, the ECM and wiring connector may be properly attached.

Warranty
Information only

Required Parts and Tools
No special tools required

No special parts required
pro multis · About Operation CHARM