Connecting Rod, Engine

6- 30 Nm (22 ft. lbs.) + 1/4 turn (90°) further

- Only for engine code AEG
- Always Replace
- Oil threads and contact surfaces
^ To measure radial clearance tighten to 30 Nm (22 ft. lbs.) but no further
- 90 ° additional angle can be measured with torque angle meter i.e., Hazet 6690

7- Conrod bolt 30 Nm (22 ft lb) + 1/4 turn (90 °)

- Only for engine codes AVH, AZG
- Always replace
- Oil threads and contact surfaces
- To measure radial clearance tighten to 30 Nm (22 ft lb) but no further.
- 90 ° additional angle can be measured with torque angle meter i.e., Hazet 6690