Readiness Code Reading

Special tools and testers
- VAG 1551/VAG 1552 Scan Tool using adapter cable VAG 1551/3

Work sequence
- Connect Scan Tool.
- With ignition switched on, press buttons -0- and -1- to select "Engine electronics" address word 01.

Display will appear as shown


Rapid data transfer HELP
Select Function XX


- Press buttons -1 - and -5- to select "Readiness code" function 15.
- Press -Q- button to confirm entry.

Display must appear as shown when all diagnostic functions have been completed


Readiness code
00000000 - Test complete


- Press -> button.
- Press buttons -0- and -6- to select "End output" function 06.
- Press -Q- button to confirm entry.

Display will appear as shown (example) if one or more of the diagnostic checks has not been completed.


Readiness code
11101011 - Test not complete


- Press -> button.

NOTE: If DTC memory was erased, Readiness code must be created again.

Relevance of 8 digit Readiness code number