Surplus Bonding/Sealing Compound, Removing
CAUTION:
- When using any cleaning agent, tallow all cautions and warnings listed on the containers.
- While adhesive sealant is hardening, avoid putting pressure on glass from inside car when cleaning glass.
- Part numbers are for reference only. Always check with your Parts Department for latest information.
Adhesive remover D 002 000 10 or equivalent is recommended for use as a cleaning agent. When using adhesive remover, all safety instructions must be observed.
- First clean painted areas roughly with a dry cloth. Remove remaining sealant with cleaning agent D 002 000 10 or equivalent.
Plastic trim, cleaning
- Allow bonding/sealing material to cure (approx. 1 hour) and then pull off.