Camber, Adjusting, Front Wheel

Front wheel camber, adjusting
Camber cannot be adjusted
If vehicle is out of specification, check trim height and balance if necessary
By adjusting sub-frame it is possible to bring camber within tolerance.





- Loosen bolts -1- and -2-.
- Move sub-frame to equalize camber on both sides.
- Check caster; caster can also change when moving sub-frame.

NOTE: Always replace sub-frame bolts (one at a time) when making this type of adjustment.

Tightening torque
Support to body 100 Nm (74 ft. lbs.) + turn 90°
Bolt position -1-
Use new bolts!
Support to body 100 Nm (74 ft. lbs.) + turn 90°
Bolt position -2-
Use new bolts!