Erase DTC Memory (Function 05)

NOTE: The VAG 1552 Mobile Scan Tool (ST) can be used instead of the VAG 1551 Scan Tool (ST), however a print-out is not possible.

- Connect VAG 1551 scan tool. VAG 1551 Scan Tool Connecting
- Initiate On Board Diagnostic (OBD). On Board Diagnostic, Initiating Program

Requirements
- Functional check completed
- All malfunctions repaired
- DTC memory checked again

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display

Rapid data transfer Q
05 - Erase DTC Memory

- Press -Q- button to confirm input.

Indicated on display

Rapid data transfer ->
DTC Memory is erased.

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX



NOTES:
- This message indicates an error in the test sequence.


Attention!
DTC Memory was not interrogated


- Adhere exactly to the test sequence: first check DTC memory, and if necessary, repair malfunctions, then erase DTC memory.

Indicated on display


Rapid data transfer HELP
Select function XX