ABS System Components For Front Axle

ABS System Components For Front Axle, Removing And Installing

Note:
^ Removing and installing ABS system parts is identical for FS III and FN 3 brake calipers.

1. ABS wheel speed sensor
^ Before inserting sensor, clean hole and coat with grease, Part No. G 000 650

2. Wheel bearing housing
3. Socket-head bolt
^ 8 Nm (71 inch lbs.)

4. Splash shield
5. Bolt
^ 10 ft. lbs. (7 ft. lbs.)

6. Wheel bearing
^ Replace each time after removing
^ Removing and installing; Refer to Transmission and Drivetrain.

7. Phillips screw
8. Brake disc
9. Wheel hub with ABS wheel speed sensor rotor
^ Removing and installing; Refer to Transmission and Drivetrain.

10. Circlip