Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 2000 >> Passat Syncro Sedan (3B2) V6-2.8L (ATQ) >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Connecting and Initial Checks >> Scan Tool VAG 5051, Connecting
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Scan Tool VAG 5051, Connecting




Vehicle Diagnosis, Testing and Information System Vas 5051, Connecting and Selecting Engine Electronics Control Module

All functions which could previously be performed with V.A.G 1551/1552 can also be performed with the new tester VAS 5051 in the operating mode vehicle On Board Diagnostic (OBD):

Special tools and equipment







- VAS 5051 Diagnosis, Testing and Information System

Work sequence
- With ignition switched off, connect tester VAS 5051 to Data Link Connector (DLC) using diagnosis cable VAS 5051/1 or VAS 5051/3.


NOTE:
- In the functions 04 - Basic setting/08 - Read data block, the display zones will be listed from top to bottom.
- If the display does not indicate as described in the work sequence:
pro multis · About Operation CHARM