Basic Setting, Initiating

NOTE:
Initiate the basic setting after performing the following repairs:
- Engine replacement
- Engine control module replacement
- Replacing/altering throttle valve (setting idling speed)
- Throttle Position (TP) Sensor -G69- replacement
- TP Sensor -G69- setting alteration, e.g. when adjusting Closed
Throttle Position (CTP) Switch (engine)
- Transmission Control Module -J217- replacement
- Connect VAG 1551 Scan Tool and enter address word "02 Transmission electronics". Advance until "Select function XX" appears in the display. Connecting Scan Tool VAG 1551 and Selecting Functions


Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -4- to select "Initiating basic setting" function 04.


NOTE: The accelerator pedal must remain in idling position.


Indicated on display


Rapid data transfer Q
04 - Basic setting


- Confirm entry with -Q- button.

Indicated on display


Basic setting HELP
Enter display group number XXX


- Press buttons -0-, -0- and -0-.
- Confirm entry with -Q- button.

Indicated on display

System in basic setting O->


The system is now in basic setting.
- Depress accelerator pedal as far as kickdown and hold in this position for 3 seconds.
- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX