Basic Setting (Function 04), Initiating

Basic Setting (function 04), initiating
The basic setting should be initiated after performing the following repairs:
^ Exchanging engine
^ Replacing engine control module
^ Altering throttle valve
^ Adjusting throttle valve (setting idling speed).
^ Replacing throttle valve potentiometer -G69-
^ Altering throttle valve potentiometer -G69- setting e.g. when adjusting idling switch (engine)
^ Removing and installing "electronic accelerator"
^ Replacing Diesel engine injection pump
^ Changes to control er, altering setting of residual quantity or maximum speed adjustment screw on diesel engines
^ Replacing automatic transmission control module -J217-
^ Connect scan tool V.A.G 1551 and enter address word "02 Transmission electronics" and advance until "Select function XX" appears in the display.
Scan Tool Connecting and Initial Checks





Indicated on display:
^ Press keys O and 4. (The function "Initiating basic setting" is selected with 04).

Accelerator pedal must remain in idling position.





Indicated on display:
^ Confirm entry with key Q.





Indicated on display:
^ Press key 0, 0 and 0.
^ Confirm entry with key Q.





Indicated on display:
The system is now in the basic setting.
^ Depress accelerator pedal as far as kickdown and hold in this position for 3 seconds.
^ Press key -> .





Indicated on display: