Sill Panel Trim, Removing and Installing (2-Door)
Sill Panel Trim, Removing And Installing (2-door)
NOTE: Removal and installation is described for right side of vehicle. same instructions apply for removal and installation for left-hand side.
Removing
- Remove seat cushion.
- Remove backrest.
- Remove side trim.
- Unscrew press button - 8 -.
- Remove bolts - 10 - (Qty. 3).
- Unclip sill panel trim - 1 -.
- Unclip sill panel trim - 1 - in front area with lower A-pillar trim - 2 -.
- Remove sill panel trim - 1 - from lower A-pillar trim - 2 -.
Installing
Installation is performed in reverse order of removal.
NOTE:
- Before installation, securing clips - 4 - must be checked for damage and replaced if necessary.
- After installation, check whether sill panel trim is located completely in door seal piping.