Sill Panel Trim, Removing and Installing (4-Door)
Sill Panel Trim, Removing And Installing (4-door)
NOTE: Removal and installation is described for right side of vehicle. Same instructions apply for removal and installation for left-hand side.
Removing
- Fold seat cushion and backrest forward.
- Remove lower A-pillar trim.
- Remove lower B-pillar trim.
- Unscrew press button - 2 - from threaded pin - 5 -.
- Remove trim - 1 - from body flange - 4 - with clips - 3 -.
- Unclip sill panel trim - 1 - upward at left and right of B-pillar.
- Unclip sill panel trim - 1 - from B-pillar toward center of vehicle.
NOTE: Cover - 5 - is located behind seatbelt.
Installing
Installation is reverse of removal.
NOTE:
- Before installation, securing clips and retaining clips must be checked for damage and replaced if necessary.
- After installation, check where sill panel trim is located completely in door seal piping.