Section A
Section A - Check ABS Control Module Part Number^ Connect VAS 5051 to data link connector located under the dash panel, outward of the steering column
^ Switch ignition to "ON" position
^ On the VAS 5051 Start-Up screen, press "Vehicle Self Diagnosis" button
^ Select "03 - Brake Electronics."
^ Read control module part number and code located in the upper right corner of the screen
^ If ABS control unit part number is 1C0 907 379 C, press <-- button, select "06 - End output", disconnect VAS 5051, turn ignition to "OFF" position and proceed to Section B
^ If ABS control unit part number is not 1C0 907 379 C no further work is required, press <-- button, select "06 - End output", disconnect VAS 5051 from vehicle and turn ignition to "OFF" position