Cruise Control System (CSS) W/O Electronic Power Control (EPC)

Cruise Control System (CSS) On Vehicles Without Electronic Power Control (EPC), Servicing


CAUTION!
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio.


Cruise control, control module -J213-, removing and installing







The cruise control, control module -J213- is located behind the airbag unit on front passenger's side.

Removing
- Remove glove box
- Disconnect electrical connector
- Remove screw -4-.
- Pull control module -3- out of retainer lip -inset- and remove.

Installing:
- Insert control module -3- bracket tab into retainer lip -inset-.
- Install screw -4-.
- Reconnect electrical connector