Section J- Reinstall Wiper Arm

- Reinstall passenger-side wiper arm onto wiper motor shaft
- Reinstall driver-side wiper arm onto wiper motor shaft
- Reinstall wiper arm retaining nuts -arrows-





TIP: The space -A- between passenger side wiper blade and bottom edge of windshield must be 20mm

- Tighten wiper arm retaining nut to 20Nm (15 lbs.-ft.)





- Reinstall black covers -arrows- on wiper arms over wiper arm retaining nuts

- Connect ground cable (GND) to the negative (-) battery terminal
- Tighten nut to 5 Nm (44 lbs.-in.)